H1 12 Bolt Hummer 45 Degree Valve Stem Adapters
SKU: SKU17525
45 Degree Valve Stem Adapters for 12 bolt valve stems to point your valve core towards your hubs to run with rock rings.
Sold Each
H1 12 Bolt Hummer Replacement Metal Valve Core
SKU: SKU17526
H1 12 Bolt Hummer Replacement Metal Valve Core
Sold Each
H1 8 Bolt Hummer Rings Only
SKU: SKU17530
This is the ring that holds the tire on the wheel shell for 8 bolt hummer double bead lock wheels.
H1 Hummer 12 Bolt Bead Lock Shell Only
SKU: SKU17529
The shell is the back half to a 12 bolt wheel which holds the 12 studs and is the part of the wheel that the new centers get welded into.
H1 Hummer 8 Bolt Bead Lock Shell Only
SKU: SKU175291
The shell is the back half to a 8 bolt wheel which holds the 8 studs and is the part of the wheel that the new centers get welded into.
H1 Hummer Wheel Replacement O Ring
SKU: SKU17521
These are MIL spec replacment Buna O-rings these will fit both 8 and 12 bolt Hummer H1 Military Wheels.
Sold Each
H1 Take Off Flange Nuts
SKU: SKU17523
MIL Spec replacment Flange nut Grade G for H1 Military Wheels fits both 8 and 12 bolt wheels. Sold Each
H1 Take Out Wheel Half-Studs
SKU: SKU17522
Take out wheel half studs for H1 Military Wheels fits both 8 and 12 bolt wheels.
Sold Each
Hummer 12 Bolt Bead Lock Wheel Dish Only
SKU: SKU17528
The "Dish" is the wheel mounting surface of a 12 bolt wheel. When you unbolt the 12 bolts and remove the nuts you can then remove the "Dish" of the wheel. The Picture is of a 12 bolt wheel with the nuts taken off and the "Dish" still located on the shell.
Hummer Wheel Flat Wheel Center
SKU: SKU17541
This wheel center is flat and welds in once the stock center has been removed. Choose your bolt pattern below.
Hummer Wheel Pressed Wheel Center
SKU: SKU175411
H1 Pressed wheel centers are made from USA High Grade 1045 Steel. These are for standard 1/4 Ton 5 on 4.5 lug pattern. These centers are stronger and lighter than the flat centers we and many others sell. The Pressed centers are 1/4 inch thick and have a 2 inch press depth, the lightening holes are also swedged for even better strength. These will fit both 8 and 12 bolt military H1 wheels. "Note 3.5 inches of backspacing is the maximum amount achievable"
Replacement Rubber Valve Stem for 8 Bolt Hummer Wheels
SKU: SKU17524
Replacement Rubber Valve Stem for 8 Bolt Hummer Wheels
Sold Each
